RS232 <> RS485 Konverter

 

COM SER - 485 PRO SI
Ein Kanal RS232 zu RS485 / RS422 Konverter (isoliert)
 

Technische Daten
 

  • Converts RS232 <=> RS422/485 
  • RS422/485 optical isolated 
  • RS485 bitrate adaptive ART (Automatic Receive Transmit control) 
  • RS422 with Hardware handshake 
  • Full Software Configuration, NO Jumpers. 
  • Quick configuration for standard modes 
  • Flexible power 9-30V DC 
  • LED indicator for Power and signals 
  • Internal Termination and BIAS by software 
  • DIN-Rail mountable

  • Bestellnummer: 96 44 18-Si
    Preis & Lieferzeit auf Anfrage

     
    Specifications
    The SER-485 PRO-SI is an adapter to convert bidirectional signals from RS232 to RS422 and RS485 in industrial environments. In RS485 mode the data direction is managed by the bitrate adaptive function of ART (Automatic Receive Transmit control). ART analyzes the data in real-time, and adapts to the setup of the RS232 port. The SER-485 PRO-SI is an optical isolated variant of the SER-485 PRO. Further the device is Surge Protected up to 4kV.  All options and parameters of SER-485 PRO-SI operation are configured by software, controlled via an easy-to-use menu structure. This menu is accessed via standard terminal programs. The SER-485 PRO-SI is a NO Jumper type of device. With SER-485 PRO-SI often used operation modes are selected by simple DIP switches. The full versatility is controlled by the built-in software configuration menu. The behaviour of RS422 and various options of RS485 are selected by an easy-to-use menu structure. The internal termination and BIAS (polarization) resistors allow to prepare the RS485 signals for connection to customers networks. These internal resistors are activated by relays, controlled by the configuration menu. There is no need to open the case for configuration.

    Hardware Specifications 
    RS232  DTE/DCE selected by DIP
    RS485  Automatic Receive Transmit control (ART) Baudrate adaption in real time
    Line adjust  Built-in Termination and Polarization (BIAS) resistors
    Operation Modes  RS422 with hardware handshake 
    RS485 by ART, RTS or DTR 
    RS485 Half- and Full-Duplex 
    Two basic modes selected by DIP switch
    Cablelength  max. 1200 m
    Speed  max. 1Mbps, max. 250kbps with ART
    Connectors  RS232 1x DB9 female 
    RS485/RS422 1x DB9 male plus Terminal Block (5 c-clamps)

    Software Configuration 
    Configuration Menu: Various parameters of signal conversion are defined via an easy-to-use menu interface, 
    access is via standard terminal programs (Hyperterminal, miniterm, ...)
    Operation Modes: RS422 
    RS485 by RTS 
    RS485 by DTR 
    RS485 by ART (Automatic Receive Transmit control)
    ART options RS485  Transmit/Receive change as quick, average, standard
    Wiring:  RS422 (4-wire) 
    RS485 Full Duplex (4-wire) 
    RS485 Half Duplex (2-wire) with Echo 
    RS485 Half Duplex (2-wire) no Echo
    Termination:  RS422/485 line termination 120R, isolated, controlled via software configuration
    RS485 BIAS (polarization) optical isolated by special drivers, controlled via software configuration

    Power and Environment 
    Power requirements  9-30V DC, 1.3W
    Power supply Adapter  12V DC, 500mA
    Dimensions  67×90×27 mm³ (W×L×H)
    Operating Temp  0°C - 60°C
    Storage Temp  -20°C - 85°C
    Case  SECC sheet metal (1mm), Weight  160 g


    KOLTER ELECTRONIC ist nicht für die Inhalte fremder Seiten verantwortlich.
    Es gelten ausschließlich die AGB der Firma KOLTER ELECTRONIC.
    Für die Richtigkeit der Angaben wird keine Gewähr übernommen.
    Alle Preisangaben sind gewerblich. Das Zahlungsmittel ist EURO.
    Alle Rechte vorbehalten. (c) copyright H.Kolter

    [ Zur KOLTER ELECTRONIC® Hauptseite ]